Plug & Play CHP60 (BW) for hollow ceilings
Installation instructions
1.
![](https://abb-manuals.com/wp-content/uploads/2022/05/1.-CHP60-BW-stekerbaar.png)
Position the box at the ceiling framework.
2.
![](https://abb-manuals.com/wp-content/uploads/2022/05/2.-CHP60-BW-stekerbaar.png)
Place the second joist (22mm). If you use thicker joists, remove the lip by turning it.
3.
![](https://abb-manuals.com/wp-content/uploads/2022/05/3.-CHP60-BW-stekerbaar-1.png)
Install the box (screws max 4 mm diameter).
4.
![](https://abb-manuals.com/wp-content/uploads/2022/05/4.-CHP60-BW-stekerbaar-1.png)
Place the ceiling plate, drillhole ΓΈ 76 mm.
When using metal C-profiles
![](https://abb-manuals.com/wp-content/uploads/2022/05/5.-CHP60-BW-stekerbaar.png)