CHP60 (BW) for hollow ceilings
Installation instructions
1.
![](https://abb-manuals.com/wp-content/uploads/2019/04/1.-CHP60-Plaats-Doos.png)
Position the box at the ceiling framework.
2.
![](https://abb-manuals.com/wp-content/uploads/2019/04/2.-CHP60-Plaats-Rachel.png)
Place the second joist (22mm). If you use thicker joists, remove the lip by turning it.
3.
![](https://abb-manuals.com/wp-content/uploads/2019/04/3.-CHP60-Schroef-Doos-vast.png)
Install the box (screws max 4 mm diameter).
4.
![](https://abb-manuals.com/wp-content/uploads/2019/07/4.-CHP60-Plaats-Plafondplaat.png)
Place the ceiling plate, drillhole ø 76 mm.
5.
![](https://abb-manuals.com/wp-content/uploads/2019/04/6.-CHP60-Plaats-verhogingsring.png)
Place an extension ring if necessary C15
Standard CHP60 to be used for single 9 to 12,5 mm drywall, use the additional extension ring for drywall of 2 x 12,5 mm
6.
![](https://abb-manuals.com/wp-content/uploads/2019/04/5.-CHP60-Monteer-centraaldoosdeksel.png)
Place the junction box cover CD/RV or CD/RVK
Placing the airtight cover
![](https://abb-manuals.com/wp-content/uploads/2019/07/5b-2-CHP60-steek-draden-door-LD-inzetstuk.png)
Insert the wires through the airtight cover CD/RVK ILD
![](https://abb-manuals.com/wp-content/uploads/2019/07/5c-2-CHP60-sluit-centraaldoosdeksel-aan.png)
Place the ceiling box cover over the CD/RVK ILD.
When using metal C-profiles
![](https://abb-manuals.com/wp-content/uploads/2019/04/x.-CHP60-Toepassing-metalen-C-profielen.png)
Plug & play junction box
![](https://abb-manuals.com/wp-content/uploads/2019/04/x.-CHP60-Stekerbare-centraaldoos.png)
You can use the strain relief to connect cables, type CHP60 K.